Pro's Corner

It really doesn’t matter were the information came from all I know is that it has changed the way I cut and fit crown molding. In my last posting I talked about my three rules to follow for installing crown molding with out copping. The first is about measuring the true length of a piece of crown? Next is there any way to know what the joint will look like before you commit to making a cut. Finally are there minor adjustments I can make to fine tune the joint?. [More]

Tags: crown molding, installing crown

Categories: Technique | Tips & Tricks

With this method of installing base cabinets, you don’t have to level each individual cabinet or adjust them to get them level to each other. First, build a plinth (toe kick base) 3” high for each run of cabinets.  I usually make my plinth 3-4” smaller on all sides than th... [More]

Tags: cabinet, installation, tip

Categories: Tips & Tricks

Checking combination squares for accuracy. [More]

Tags: combination squares, calibration

Categories: Tips & Tricks

Ripping wide panels. [More]

Tags: saw fence, sheet goods

Categories: Jigs & Tools | Tips & Tricks

Laminating difficult wood. [More]

Tags: lamination, steam bending, oak

Categories: Technique | Tips & Tricks

Wood shims are great for framing, but they are just a pain when it comes to precision woodworking. [More]

Tags: shims, tips, tricks

Categories: Tips & Tricks

There are two schools of thought when it comes to cleaning up glue squeeze-out: 1. Wipe it up right away with a damp rag 2. Let the glue sit for 30-60 minutes until it is gummy, then scrape it off. [More]

Tags: glue, clean-up, scrape, tip

Categories: Tips & Tricks

This little trick isn't the kind that will help you out every day, but it may be useful some day.. [More]

Tags: sliding dovetail, cabinet feet

Categories: Tips & Tricks

Layout Straightedge Trick. [More]

Tags: tips, tricks, straightedge

Categories: Tips & Tricks