Untitled
IMPORTANT SAFETY RECALL
DEWALT D51825 and D51850 Framing Nailers
DEWALT Industrial Tool Company is recalling to repair the following framing nailers.
The trigger on the framing nailers could be incorrectly assembled, which would allow
the nailer to eject a fastener unexpectedly or cause the trigger lock-off not to function.
| The following products are affected: |
| Model Number |
Description |
Date Code |
| D51825 |
Clipped Head Framing Nailer |
20080249-20082749 |
| D51850 |
Full Round Head Framing Nailer |
20080249-20082749 |
ONLY NAILERS WITH THE MODEL NUMBERS AND DATE CODES LISTED
ABOVE ARE AFFECTED
|
The location of the model number and date code are shown on the photography below.
Products stamped with a “T” following the date code have been inspected and
are not affected.
Inspected product in the original packaging will have a green dot sticker near the UPC label.
If your framing nailer is affected, STOP USING IT IMMEDIATELY,
and call DEWALT toll-free:
1-877-437-7181
between 8:00 AM – 5:00 PM Eastern Time Monday through Friday.
www.DEWALT.com
for instructions on obtaining a free replacement trigger.
Recall done in cooperation with the U.S. Consumer Product Safety Commission
Post Until October 31, 2009
All Products at a Glance
Global
| Webmaster
| Company Information
