2008 DEWALT DC608 18V CORDLESS 2 INCH 18 GAUGE STRAIGHT BRAD NAILER

SAFETY RECALL NOTICE

IMPORTANT SAFETY RECALL

 

DEWALT DC608 18V Cordless 2" - 18 Gauge Straight Brad Nailer
 

It could be possible for the nailer to operate with the contact trip lock off mechanism in the "down" or "engaged" position or only with the contact trip depressed. The following nailers may be affected:
 

 Model Number    Description Date Code
 DC608 Heavy-Duty 18V Cordless 5/8"-2" 18 Gauge 200728 through 200821

 

ONLY NAILERS WITH THE MODEL NUMBERS AND DATE CODES LISTED ABOVE ARE AFFECTED

The location of the model number and date code are shown on the photography below.
Products stamped with an "M" following the date code have been repaired and are not affected.

If your nailer is affected, STOP USING IT IMMEDIATELY, and call DEWALT toll-free 1-866-220-1481 between 8:00 AM – 5:00 PM Eastern Time Monday through Friday. Or go to www.DEWALT.com for the location of a service center to obtain a free repair.

Recall done in cooperation with U.S. Consumer Product Safety Commission 7/08 DC608KRP
Post Until December 1, 2008