60V MAX* 1-7/8 in. Brushless Cordless SDS MAX Combination Rotary Hammer Kit

60V MAX* 1-7/8 in. Brushless Cordless SDS MAX Combination Rotary Hammer Kit

The 60V MAX* Brushless 1-7/8 in. SDS MAX Combination Hammer is a midweight, high-performance hammer that is powered by a brushless motor and a durable German engineered mechanism. It delivers 13.3 Joules of impact energy for fast drilling and chipping, even in the hardest concrete. The constant speed electronics allow the tool to maintain speed under load. The midweight design makes it ideally suited for horizontal and downward drilling for #6 - #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower to mid wall, ground rod driving, and bushing. This hammer is part of the PERFORM & PROTECT™ product line, integrated with the Anti-Rotation E-CLUTCH® System and the SHOCKS Active Vibration Control® System. E-CLUTCH® shuts down the tool in bind up situations. SHOCKS® reduces vibration felt by the user at the handles, compared to rotary hammers without this feature. This tool comes Tag Ready™ so users and companies can attach the DEWALT Tag™ and track its location virtually anywhere via the DEWALT Tool Connect™ app.


  • End-users drill into concrete wall or floor slab to install #5- # 9 rebar with adhesive anchors, to add concrete extensions to the wall or floor.
  • To install a mechanical anchor, a hole must be drilled first. Mechanical anchors are used to secure other materials to concrete. A typical anchors for this type of tool include our Atomic+ Undercut®, large diameter Power-Stud®+, large diameter Power-Bolt®+ or large diameter Screw-Bolt+™
  • Co mm.ercial electrical, mechanical and plumbing contractors will drill holes thru concrete walls with a coring bit to feed pipes and other utilities into other areas of the building.
  • Companies that do both drilling and demolition will use these combination ha mm.ers to chip away over-poured concrete once forms are taken off.
  • Co mm.ercial Demolition, Masonry and Concrete contractors will use this tool to demo concrete and masonry wall and floor structures.


  • (1) DCH733 1-7/8 in. SDS MAX Rotary Hammer
  • (1) (2) DCB609 FLEXVOLT® 20V/60V MAX* Batteries,
  • (1) DCB118 Charger
  • (1) Kit Box


3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed

We’re confident of the quality of our products, and we’ll repair, without charge, any defects due to faulty materials or workmanship within the specified warranty.

Learn More


We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.


* Maximum initial battery voltage (measured without a workload) is 20 and 60 volts. Nominal voltage is 18 and 54.