DEWALT - 12 in 13 mm VSR Pistol Grip Drill - DWD210G

DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill

The DWD210G 1/2 in. (13 mm.) VSR Pistol Grip Drill has a powerful 10 amp motor with overload protection to drill at 0-1250 RPM in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability. Includes 360-degree locking side handle for versatility.

Features & Specs

FEATURES

  • 10 amp motor delivers increased drilling performance
  • Patented DEWALT®-built motor design generates 50% more power with increased overload protection for added durability
  • 0-1250 RPM, variable speed reversing switch for increased versatility
  • Soft grip handle and two-finger trigger for increased comfort and greater control
  • 360-degree locking side handle with soft grip for greater control and versatility
  • Metal-gear housing for jobsite durability and increased reliability

Specifications

  • Amps 10.0 Amps
  • Chuck Size 1/2"
  • Chuck Type Keyed
  • No Load Speed 0-1,250 rpm
  • Power Tool Type Corded
  • Tool Weight 4.9 lbs

Includes

  • 360° locking side handle with soft grip
  • Chuck key with holder

Warranty & Service Information

FAQs

  • ?

    Noise and Vibration Values for DWD210G Drill

    These declared values were obtained by laboratory type testing in compliance with the stated standard and are not adequate for use in risk assessments. Values measured in individual work places may be higher than the declared value. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece / accessory interaction and the workstation design, as well as upon the exposure time and the physical condition of the user.
     
    We, (Stanley Black & Decker Corp.), cannot be held liable for the consequences of using the declared value, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control.
     
     
    Declaration for the DWD210G Drill as Measured per EN60745 :
     
    Declared Noise Emission Values 
     
        Sound Pressure Level                               LpA = 87 dBA
        Sound Pressure Level Uncertainty          KpA =  3 dBA
     
        Sound Power Level                                  LwA = 98 dBA
        Sound Power Level Uncertainty              KwA =   3 dBA
     
    Declared Vibration Emission Values
     
        Tri-axial Vibration Value                      ah <  2.5 m/s^2  *while drilling metal
        Vibration Uncertainty Value                 K =  1.5 m/s^2
     
    The sum of the emission value and the uncertainty is the limit below which there is a 95% confidence that the value of a single machine will perform when the machine is new.