DW745 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System

The DW745 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System features tool-free guarding component adjustments and fast, accurate fence adjustments. 20 in. of rip capacity to handle large materials. Compact and lightweight with a metal roll cage for jobsite durability.

Features & Specs

FEATURES

  • Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application
  • 20 in. of rip easily cuts a variety of larger shelving and trim materials
  • Rack and pinion fence rails make fence adjustments fast, smooth, and accurate
  • Telescoping fence rails retract to create a small, portable package
  • On-board storage provides easy access to the Site-Pro guarding components and push stick when not in use
  • Metal roll cage base offers greater durability than plastic bases
  • Shoe bevels 0° to 45° for beveled cuts
  • Weighing only 45 lbs, the DW745 can easily be moved on and off the job
  • Adjustable rear feet designed to level the saw on uneven work surfaces
  • Dust port allows for 2-1/2 in. vacuum hook up and minimizes clean up
  • 24T carbide blade enhances cut quality and prolongs blade life
  • Table coating reduces friction for smoother cutting

Specifications

  • Amps 15.0 Amps
  • Arbor Size 5/8 in
  • Blade Diameter 10"
  • Depth of Cut at 45° 2-1/4 in
  • Depth of Cut at 90° 3-1/8 in
  • Dust Port Diameter 2-1/2 in
  • Max Rip To Left Of Blade 12 in
  • Max Rip To Right Of Blade 20 in
  • Max Width of Dado N/A in
  • No Load Speed 3,850 rpm
  • Power Tool Type Corded
  • Tool Weight 45 lbs

Includes

  • Miter Gauge
  • Push stick
  • 10 in. 24T Carbide Blade
  • Blade Guard

Warranty & Service Information

FAQs

  • ?

    Can the DW7440RS be used to mount any other portable tool such as the DW735 planer?

    The stand is not approved for any other tools other than the table saw. 

    The stand is not recommended for use with any miter saw.

    The stand was approved by UL for use with the DW744 and DW745.  

    The stand will work with most, but not all, other portable table saws.  We do not have a listing of what brands or models of other table saws that this stand will accommodate.  When using this stand, the most important thing to determine when using another brand saw is that ALL four fastening holes on the base of the table saw must be fastened to the brackets on the DW7440RS to allow them to connect to the stand rail so the brackets are parallel to each other. (see attached manual) 

     

  • ?

    Does DW7440 stand fit the DWE7480 or DW745 table saws?

    No it will not.The DW7440 will fit the DW744 and DW744X table saws only.