2009 Safety Recall D51825 and D51850 Framing Nailers
SAFETY RECALL NOTICE
DEWALT Industrial Tool Company is recalling to repair the following framing nailers. The trigger on the framing nailers could be incorrectly assembled, which would allow the nailer to eject a fastener unexpectedly or cause the trigger lock-off not to function.
The following products are affected:
| Model Number | Description | Date Code |
| D51825 | Clipped Head Framing Nailer | 20080249-20082749 |
| D51850 | Full Round Head Framing Nailer | 20080249-20082749 |
ONLY NAILERS WITH THE MODEL NUMBERS AND DATE CODES LISTED ABOVE ARE AFFECTED
The location of the model number and date code are shown on the photography below.
Products stamped with a “T” following the date code have been inspected and are not affected.
Inspected product in the original packaging will have a green dot sticker near the UPC label.
If your framing nailer is affected, STOP USING IT IMMEDIATELY, and call DEWALT toll-free: 1-877-437-7181(between 8:00 AM – 5:00 PM Eastern Time Monday through Friday) or visit www.DEWALT.com (for instructions on obtaining a free replacement trigger).
Recall done in cooperation with the U.S. Consumer Product Safety Commission
Post Until October 31, 2009
We regret any inconvenience this situation may cause and thank you for your cooperation and continued support.
DEWALT is dedicated to producing quality products.