DCF889HM2 20V MAX* 1/2" High Torque Impact Wrench Kit

FAQs

• ?

  What is the difference in a hog ring anvil and detent pin anvil on an impact wrench?

  A detent pin anvil has a retaining pin that must be pressed in to release a socket from the impact driver. A hog ring anvil has a ring that exerts pressure on the socket and can be removed without tools (or with bare hands).
  
  The difference is in application- typically a user in an elevated position who is driving the same sized nuts or bolts, will use the detent pin anvil.  This is common for applications such as bridge or building assembly, water tower assembly and other construction type projects. In these applications, the detent pin will prevent the socket from falling out unexpectedly.
  
  The hog ring anvil is used by those who need to quickly change, such as a mechanic. The mechanic working on a vehicle will need to quickly change out the sockets without the extra step of using another tool to release the socket from the anvil. In this application, it's usually low to the ground, so a socket that falls out will not pose a safety hazard to those below. 
  
  DEWALT impact drivers with the hog ring will contain the letter H, for example- DCF889HM2 or DW059HK-2. In some situations, the anvil may be converted. Please consult a factory service center. 
  
  Detent pin anvil:
  
  
  
  
  Hog ring anvil:
  
  
  
  
  Expand To See Answer
• ?

  2016 AUTOZONE DeWALT Q1 REBATE 1-1-2016

  We are offering the following DEWALT manufacturer's mail-in rebates with the purchase of select DEWALT tools from any authorized participating AutoZone, Inc retailer. Please note the following promotion highlights:

  I BOUGHT	I GET
  DCK397M2 OR DCK398HM2	DCD780B
  DCF899P1 OR DCF899HP2	DCF885B
  DCD980M2, DCF889HM2, DCS355D1, DCF880HM2, DCGG571M1, DCS371P1, DCF883M2, DCD780C2, OR DCS387P1	DCG412B OR DCF885B
  DCF886D2, DCK280C2, DCK281D2, OR DCG412P2	DCS387B
  DCF813S2, DCK211S2, DCK210S2, OR DCK212S2	DCL510 OR DCB127

  This offer is only available at participating authorized AutoZone,Inc retailers.

  • You must purchase a qualifying tool between January 1, 2016 and March 31, 2016.
  • You claim must be postmarked on or before April 15, 2016.

  To receive your rebate you must include the following:

  • A redemption form completed in its entirety. Download the attached file located at the end of this answer.
  • Original AutoZone, Inc. sales receipt(s) or sales invoice(s) dated between 1/1/2016 and 3/31/2016. Photo copies will not be accepted (except for RI residents). It is recommended that you make a photo copy of all submitted materials for your records. Note: To resolve any potential questions or issues regarding your submission, you may be required to mail or fax these copies.
  • Original UPC barcode cut from the outside product packaging of the DEWALT product purchased.

  In a stamped envelope mail the above items to:
  
  DEWALT
  DWRP125
  PO Box 42833
  Towson, MD 21284
  
  Please allow 5-7 weeks for delivery. To check the status of your rebate please call 866-444-5290.
  
  Thank you for your interest in DEWALT tools. It has been our pleasure to provide this information. For additional details, disclaimers and exclusions please read the fine print found on the rebate form.
  Expand To See Answer