DW267 2,000 rpm VSR VERSA-CLUTCH™ Screwgun

The DW267 2,000 rpm VSR VERSA-CLUTCH™ Scrugun is constructed with helical-cut steel and heat-treated steel gears for long life and durability. Rubber grip and two-finger trigger provides comfort and control.

Features & Specs

FEATURES

  • Helical-cut steel and heat-treated gears for long life and durability
  • High power motor for metal fastening applications
  • Versa-Clutch® torque adjustment system dials in the proper torque needed to efficiently drive fasteners without stripping or breaking
  • Two-finger trigger for increased comfort and ease of use
  • Metal nose and gear case for durability on the job
  • Excellent ergonomics offers less user fatigue

Specifications

  • Amps 6.5 Amps
  • Clutch Type VERSA -Clutch
  • Max Fastener Size #14
  • No Load Speed 0-2,000 rpm
  • Power Tool Type Corded
  • Tool Weight 3.7 lbs
  • Torque 164 in-lbs

Warranty & Service Information

FAQs

  • ?

    I can't get the nose cone off my DEWALT scrugun (corded screwdriver gun)

    Non Versa-Clutch DEWALT scrugun nose cones can be removed. The manual states to pull straight back, however a brand new unit may be difficult to remove. Try twisting the nosecone while pulling back to remove the nose cone.

    Note Versa Clutch and Positive Clutch models (DW267, DW268, DW269, DW281, DW284 etc) do not have a nose cone. 
  • ?

    Are there individual torque values for each setting on Versa-Clutch® units?

    Yes. The approximate value for each torque setting is determined by dividing the maximum torque value for your screw gun by the number of settings on the Versa-Clutch® nose piece. For example if you have a DW267 each setting would have an approximate value of 16.4 inch pounds of torque (164/10=16.4). Keep in mind that these settings are approximate and have a plus or minus value of 30%. Additionally, these values will change as the clutch mechanism wears from normal use. If you require absolutely precise torque settings for use in critical assemblies we strongly suggest that you use a production assembly tool that can be calibrated on a daily basis.