20V MAX* XR® 4.5 in. Paddle Switch Small Angle Grinder with KICKBACK BREAK™ (Tool Only)
20V MAX* XR® 4.5 in. Paddle Switch Small Angle Grinder with KICKBACK BREAK™ (Tool Only)
- Brushless motor requires no brush changes.
- Brake stops wheel in 2 seconds or less on average
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off.
Product Overview
Additional Features
- Features E-Switch Protection™ - When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool.
- Two stage trigger requires two actions to activate tool.
Applications
- Metal Grinding
- Metal Cutting
- Cutting Bricks/Pavers
- Concrete Cutting
- Concrete Surfacing
Includes
- (1) Grinder
- (1) Side Handle
- (1) Hex Key
- (1) Inner and Outer Flange
- (1) 4.5 in Type 27 Guard
Specifications
Tool Length
|
12.2 in
|
No Load Speed (RPM)
|
9000
|
Weight (Including Battery)
|
4 lbs
|
Tool Weight
|
3.8 lbs
|
Voltage
|
20 V
|
No Load Stroke Rate
|
0 - 2800
|
Product Weight
|
3 3/4 lbs
|
Uncertainty K2 (Vibration)
|
3
|
Power
|
800 W
|
Support
3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed
We’re confident of the quality of our products, and we’ll repair, without charge, any defects due to faulty materials or workmanship within the specified warranty.
Service
We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.
Support Manual
Disclaimer(s)
- * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.